« Serial Numbers for Flex Builder 3 | Main | Update on Flex, ActionScript, AIR Posters »
February 25, 2008
Follow-up on Flex Builder 3 Serial Numbers
Here's the update on the serial numbers. We have identified the problem in the system that prevented serial numbers from getting into the system to allow FB Pro serial numbers to be sent out (FB Standard are working fine). Our team is going to let things propagate over night and test very early in the morning. We will hopefully be live by Noon PST on Tuesday 2/26 (tomorrow). Once we are live we should be able to generate emails to everyone who had bought who was waiting on a serial. However, feel free to check the download center for your serial occasionally starting at 8am PST in case the email generation is delayed.
Once again, we're really sorry for the inconvenience. I know how it feels to get that new toy and find out batteries weren't included :-)
Update at 9am EST: all serial numbers are up and customers should be able to get their serials from the download page.
Posted by mchotin at February 25, 2008 07:18 PM
Comments
please!
Posted by: rich kim at February 25, 2008 09:42 PM
nice one, i had this problem, but serial now sorted.
Posted by: vinnie vivace at February 25, 2008 11:41 PM
Thanks guys for getting on top of this.
Posted by: Tangent at February 26, 2008 04:30 AM
Got the serial from the web store.
Despite stating that the serial is for "FlexBuilder Profressional upgrade" my charts still have the watermark Flex Charting Trial.
Please help !!
Thanks
Posted by: Yves Custeau at February 26, 2008 05:04 AM
Hi Yves,
You should be able to simply rebuild your project (do a clean build) or you may need to even restart Flex Builder.
Posted by: Matt at February 26, 2008 05:49 AM
Thanks Matt
Cleaning and rebuilding the project did remove the watermark from the resulting swf (either RUN or Exported build) !!
But I still get the watermark is design mode during development despite restaring Flex a few times.
Weird isn't it ?? If you could have someone check this out when the serial storm has cleared !!!
Thanks
Yves
Posted by: Yves at February 26, 2008 06:14 AM
Same as usual with all Adobe products - why is the software so much more expensive in Europe than in the US? According to the exchange rate $/€ Flex Builder 3 should cost €470 but in the German store but it is actually €593. Why can't I download the stuff from the US store? I feel cheated.
Posted by: Peter at February 26, 2008 08:28 AM
What about the folks who have a maintenance agreement on FB2? When will we get FB3 serial numbers?
I hope it goes better than the CF7 to CF8 upgrade? It took us more than 2 months to get Adobe to send us the CF8 serial numbers (we had a current maintenance agreement for CF7).
Posted by: Bill Bagent at February 26, 2008 08:59 AM
need a Flex Builder 3 standard uninstaller for Windows XP. When I uninstall FB3 standard through Add and Remove programs and install FB3 Pro the standard license still appears in the Manage Flex Licenses under help. When I do an upgrade it tells me that my license key is invalid. I did a fresh install at home without installing FB3 standard and I was successful installing FB3 Pro. I did regedit and searched for Flex Builder 3 and that did not help. So I need a FB3 Standard uninstaller...:)
Posted by: Ron at February 26, 2008 11:12 AM
Bill, It should be the next few days as far as I know.
Ron, you may need to just manually update the serial number in the license.properties file which can be found here: %ALLUSERSPROFILE%\Application Data\Adobe\Flex\license.properties
Posted by: Matt at February 26, 2008 02:45 PM
It's the 27th and my serial number still hasn't appeared :-(
Posted by: mike at February 27, 2008 12:35 PM
Hi Mike,
If you want to contact me offlist with your email and Adobe ID I can try to see if customer service knows anything (but might just be best to contact them yourself at this point).
Posted by: Matt at February 27, 2008 05:37 PM
If I purchase the boxed version will I have to wait until I get it or will it also be available on the Downloads website?
Posted by: Andy at February 28, 2008 12:31 AM
Hi, I was running the Beta3.
Uninstalled and installed RC1.
When the final release happened my RC1 version stopped working, (I had at least 45 days left on trial), so I uninstalled and installed the Trial version. It worked for about 3 hours and then when I restarted exlipse, it tells me my trail has expired.
I have no license.properties (I am on XP) in either the ALLUsers or my User area (There are Adobe Folders but no Flex Folder).
I have tried using the -clean option. no go.
Any Ideas?
Thank you in advance.
Posted by: David at February 28, 2008 01:46 AM
Hi Andy, I think you will need to wait for the box to arrive for the serial, though you can of course download the trial in the meantime.
Hi David, please search your system for license.properties and potentially just remove it if you find it. Are you using the Eclipse plugin or standalone?
Posted by: Matt at February 28, 2008 11:19 AM
Why so much in Europe?
Because currency values are all fictional. I've discovered a naughty little secret. While the U.S. dollar has a far lower value than the Euro, it tends to have the same buying power.
For example: Convert the currencies and look at the pricing for an Apple MacBookPro, Xbox 360, etc. And most of the time the U.S. dollar is buying on almost a 1-for-1 (and sometimes even better) against the Euro and other currencies.
So while our dollar is worth less, it buys the same goods. Quite odd I'll admit. It might actually be due to all the extra taxes, tariffs, etc. that Europe adds to support socialism. Or maybe us Americans are just evil. Who knows...
But it just is...
Posted by: Jason the Saj at March 4, 2008 06:59 AM
may 2008 serial number
Posted by: kalai at March 13, 2008 03:47 AM
serial flex builder 3
Posted by: deverson at April 1, 2008 10:51 AM